nub8.1linux客户端安装

1.配置hosts解析,nbu服务器端和客户端都需要配置

vi /etc/hosts 添加

192.168.100.198 nbu-server

2.nbu client安装

tar zxvf NetBackup_8.1.1_CLIENTS2.tar.gz 

cd NetBackup_8.1.1_CLIENTS2

./install

[root@nbuclient NetBackup_8.1.1_CLIENTS2]# ./install 


Veritas Installation Script
Copyright (c) 2018 Veritas Technologies LLC. All rights reserved.


        Installing NetBackup Client Software


Please review the VERITAS SOFTWARE LICENSE AGREEMENT located on
the installation media before proceeding. The agreement includes
details on the NetBackup Product Improvement Program.

For NetBackup installation and upgrade information specific to your
platform and to find out if your installed EEBs or hot fixes are
contained in this release, check the Installation and Upgrade checklists
and the Hot Fix and EEB Release Auditor, both available on the Veritas
Services and Operations Readiness Tools (SORT) page:
https://sort.veritas.com/netbackup.

Do you wish to continue? [y,n] (y) y


Checking for required system conditions...

ok unsupported_platform: Passed checks for unsupported platforms.
ok be_nb_same_host: inapplicable on linux: skipping

Checking for recommended system conditions...

ok hotfix_auditor: NetBackup is not installed or there is no hotfix or EEB data present. Skipping HF/EEB Auditor check.
not ok ephemeral_port_range: The ephemeral port range include ports used by NetBackup services.
  The NetBackup Master Servers may not start up correctly if the system
  is configured with an ephemeral port range that conflicts with
  the ports that are used by NetBackup services. This test checks whether the 
  current ephemeral port range includes the ports used by NetBackup services.
  See https://www.veritas.com/support/en_US/article.100040677.htm for
  details.

WARNING: One or more non-critical preinstall checks have failed.

Do you want to install the NetBackup client software for this client? [y,n] (y) y

This package will install Linux/RedHat2.6.18 client.

This package will install NetBackup client 8.1.1.

Enter the name of the NetBackup master server : nbu-Server


Would you like to use "centos.walkingcloud.cn" as the configured
name of the NetBackup client? [y,n] (y) n

Enter the name of this NetBackup client : centos


Successfully unpacked /home/NetBackup_8.1.1_CLIENTS2/NBClients/anb/Clients/usr/openv/netbackup/client/Linux/RedHat2.6.18/certcmdTool_for_UNIX.tar.gz.

Checking connectivity to the master server.
NOTE: Depending on the network, this action may take a few minutes.
      To continue without setting up secure communication, press Ctrl+C.
Connectivity established.

Checking for local CA certificate
Local CA certificate is not found on host. Proceeding with installation.

Getting CA certificate details.
NOTE: Depending on the network, this action may take a few minutes.
      To continue without setting up secure communication, press Ctrl+C.

CA Certificate received successfully from server nbuserver.

         Subject Name : /CN=nbatd/OU=root@nbuserver/O=vx
           Start Date : Jun 11 23:04:17 2022 GMT
          Expiry Date : Jun 07 00:19:17 2042 GMT
     SHA1 Fingerprint : FB:33:C7:D3:86:8A:E9:DE:00:B4:69:F1:0A:29:76:58:90:A6:D9:C1
 CA Certificate State : Not Trusted

Master server [nbuserver] reports CA Certificate fingerprint
[FB:33:C7:D3:86:8A:E9:DE:00:B4:69:F1:0A:29:76:58:90:A6:D9:C1].

Is this correct? [y,n] y

Storing CA certificate.
NOTE: Depending on the network, this action may take a few minutes.
      To continue without setting up secure communication, press Ctrl+C.
The validation of root certificate fingerprint is successful.
CA certificate stored successfully from server nbuserver.

Getting host certificate for hostname centos.
NOTE: Depending on the network, this action may take a few minutes.
      To continue without setting up secure communication, press Ctrl+C.

An authorization token is required in order to get the host certificate for this
host.  At the prompt, enter the authorization token or q to skip the question.
NOTE: The answer entered will not be displayed to the terminal.

Enter the authorization token for nbuserver or q to skip: 

Getting host certificate with token for hostname centos.
NOTE: Depending on the network, this action may take a few minutes.
      To continue without setting up secure communication, press Ctrl+C.
Host certificate and certificate revocation list received successfully from server nbuserver.

Client binaries are located in /home/NetBackup_8.1.1_CLIENTS2/NBClients/anb/Clients/usr/openv/netbackup/client/Linux/RedHat2.6.18.

Starting NetBackup Deduplication installer
testing: /tmp/pdde_pkg_dir_3157
NetBackup Deduplication preinstall check passed
Installing VRTSnbpck ...
Installation of VRTSnbpck was successful. Check /tmp/install_VRTSnbpck.rpm_trace.3141 for details.
Installing VRTSpbx ...
Installation of VRTSpbx was successful. Check /tmp/install_VRTSpbx.rpm_trace.3141 for details.
Installing VRTSnbclt ...
Installation of VRTSnbclt was successful. Check /tmp/install_VRTSnbclt.rpm_trace.3141 for details.

Terminating NetBackup and/or Media Manager processes.

Installing NB-Java.
Installing VRTSnbjre ...

Installation of VRTSnbjre was successful.
More details regarding VRTSnbjre can be found in file
/tmp/install_VRTSnbjre.rpm_trace.3554 on centos.walkingcloud.cn.
Installing VRTSnbjava ...

Installation of VRTSnbjava was successful.
More details regarding VRTSnbjava can be found in file
/tmp/install_VRTSnbjava.rpm_trace.3554 on centos.walkingcloud.cn.

Migrating log files in /usr/openv/logs
Migration of log files complete.

No [x]inetd process found.
Installing VRTSpddea.rpm ...
Installation of VRTSpddea.rpm was successful. Check /tmp/install_VRTSpddea.rpm_trace.3141 for details.
Installing VRTSnbcfg.rpm ...
Installation of VRTSnbcfg.rpm was successful. Check /tmp/install_VRTSnbcfg.rpm_trace.3141 for details.


File /usr/openv/tmp/install_trace.2865 contains a trace of this install.
That file can be deleted after you are sure the install was successful.

firewall-cmd --permanent --zone=public --add-port=13724/tcp

firewall-cmd --permanent --zone=public --add-port=1556/tcp

firewall-cmd --reload

4.检查解析是否正常