0031.E infiniband交换机未正常启动处理一则

[root@dw01celadm01 ~]# ibstatus        #两个网卡均为DOWN状态
Infiniband device 'mlx4_0' port 1 status:
  default gid:   fe80:0000:0000:0000:0010:e000:0129:1e7d
  base lid:   0x0
  sm lid:     0x0
  state:     1: DOWN
  phys state:   2: Polling
  rate:     10 Gb/sec (4X)
  link_layer:   InfiniBand


Infiniband device 'mlx4_0' port 2 status:
  default gid:   fe80:0000:0000:0000:0010:e000:0129:1e7e
  base lid:   0x0
  sm lid:     0x0
  state:     1: DOWN
  phys state:   2: Polling
  rate:     10 Gb/sec (4X)
  link_layer:   InfiniBand

WARNING! The remote SSH server rejected X11 forwarding request.


Sun Data center switch pre-boot environment.




======================================================================
=                                                                    =
= WARNING: This is pre-boot environment used for system maintenance. =
=          Application image is not active!!!                        =
=                                                                    =
======================================================================


 Do you wish to remain in pre-boot environment?
  If you do, please answer 'y' (timeout 10 seconds) [N/y]:y    #1.输入y



To start application image enter command 'boot' at any time.


init> boot                #2.输入boot，启动
  Previous application starts failed (3 times). Please run check_app_partition.
Will not start application image.
init> check_app_partition            #3.进行分区文件检查
Doing filesystem check ...
e2fsck 1.39 (29-May-2006)
/dev/sda5 has gone 222 days without being checked, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sda5: 17190/110592 files (3.8% non-contiguous), 401410/441116 blocks
Everything looks OK.  
init> boot                #4.再次启动OK
init> 
Connection closed by foreign host.


Disconnected from remote host([ibb]192.168.1.233) at 09:59:09.


Type `help' to learn how to use Xshell prompt.
[c:\~]$