Configure Ethernet Bonding Interface on EL5 or RHEL5 (文档 ID 877012.1).docx
40墨值下载
Congure Ethernet Bonding Interface on EL5 or RHEL5
(
文档
ID 877012.1)
转到底
部
In this Document
Goal
Solution
References
This document is being delivered to you via Oracle Support's Rapid
Visibility (RaV) process and therefore has not been subject to an
independent technical review.
APPLIES TO:
!"# $%&
!"# &'(&
GOAL
)%%*(%" +,-+$
.././00 (
SOLUTION
'0*(0 1%(%"
1%(%#
# grep bond0 /etc/modprobe.conf
alias bond0 bonding
1%/"
# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
# cat /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
1%(%" 0(%*.
# cat /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
BOOTPROTO=dhcp
ONBOOT=yes
BONDING_OPTS="mode=4 miimon=100 lacp_rate=1"
#(%"
# ifup bond0
+2,-+ (%" 1%34
.. 1%(%*." "%(5
"2 2.*( "6(1*.
( %*(%" %"
7* 8(%#7
* 6/8*. %9
(%#(/.6*
/.00!%0%./ %
(%"
:((%*. 1%
2 2.*( "**34; ..
of 3
40墨值下载
【版权声明】本文为墨天轮用户原创内容，转载时必须标注文档的来源（墨天轮），文档链接，文档作者等基本信息，否则作者和墨天轮有权追究责任。如果您发现墨天轮中有涉嫌抄袭或者侵权的内容，欢迎发送邮件至：contact@modb.pro进行举报，并提供相关证据，一经查实，墨天轮将立刻删除相关内容。
下载排行榜
评论